PrintMax is our highest impact printed banner mesh that we manufacture.
As the name suggests, it’s called PrintMax because it has the best print outcome of all our mesh options.
The reason for this is because it has the smallest holes, meaning that it has the most amount of material for the ink to go on, meaning it looks the best once printed. However, as a consequence of this, it has less air permeability which means it has the potential to blow over temporary fencing if the fencing does not have rear supports and extra weights.
Because PrintMax printed banner mesh has the lowest air permeability we strictly recommend it only for the following applications:
Temporary fences that have rear supports and additional weights
Hoarding (A more cost effective option compared to 100% PVC)
Crowd control barriers (weighted)
Large Outdoor Art Installation
Why We Refer To “Print Impact” And Not “Print Quality”
All of our banner meshes, regardless of the grade, are printed on the same printer, meaning the quality of the print will be of equal quality on all the meshes, just that when you choose a more open weave mesh like BreezeMax you have actual material to hold the ink, so that's why we say it has less of a print "impact".
A real sample fence panel printed on PrintMax banner mesh.
Banner mesh has a very high photo-like print quality and a lot of clients are preferencing it now over other products like printed shade cloth purely because of this.
The same artwork, photos, text, colours etc can be printed on all the meshes, you’ll just see the print as being more vibrant and strong on the PrintMax over anything else as:
There is more mesh surface to hold the ink
Less light comes through from behind the mesh, meaning it gets less “washed out”
All of our printed banner meshes are sold with an expected lifespan of 2-3 years.
The inks that we use are genuine inks that have a 2 year no significant fade guarantee. So a minimum 2 year lifespan should be expected - with longer in low UV locations like Adelaide/Melbourne/Hobart.
The Print Max printed banner mesh can be used over and over again. Once a project is finished, the mesh can be rolled up and taken to the next site.
FenceWrap printed banner mesh comes in 50m rolls as standard.
The roll can be supplied as a whole (which you can cut up for different sites) or we can pre-cut the roll into individual banners if you have a common size that you need or are happy to accept.
Common sizes that are cut are 5m and 10m.
Two heights are available, 1600mm or 1800mm once finished.
If your fence (or fence panel) is 1800mm tall, we recommend 1600mm tall FenceWrap as it will stretch a lot nicer onto the fence and look better once set up.
Custom Sizes & Panels
The printed banner mesh itself actually comes from the manufacturer in widths up to 5m, so we can make custom sized banners to cover scaffolding or buildings. Multiple prints we welded together to make a single banner, and are edged and eyeleted. We’ve actually made banners up to 30m x 30m before.
If considering the full banner mesh rolls, they can also be cut into banners if you like to fit specific fences or spaces. We charge per vertical cut, so you can cut 50m roll however you like.
If you have any concerns about PrintMax being too solid for your application and need something with more air permeability, you can consider one of our alternative printed banner meshes.