BreezeMax Overview
Eyelets Every 500mm
Cuttable Into Lengths
Full Colour Printing
Outdoor Rated Inks
BreezeMax In Detail
BreezeMax is our ultimate temporary fence mesh, and is made for the highest wind applications out there.
It's large open weave means it has the largest possible holes in the mesh and will allow the most amount of wind to flow through it compared to all of our other banner mesh options.
It still prints to a great standard, and looks great, and is the go to choice for temporary fences.
All of the temporary fence banner mesh options have a very high photo-like print quality and a lot of clients are preferencing it now over other products like printed shade cloth purely because of this.
The same artwork, photos, text, colours etc can be printed on all the meshes, you’ll just see the print as being more vibrant and strong on the PrintMax over anything else as there is more mesh surface to hold the ink and less light comes through from behind the mesh, meaning it gets less “washed out”.
In saying that though, BreezeMax still looks fanatic when printed as you see in this example.
Lifespan
All of our printed banner meshes are sold with an expected lifespan of 2-3 years.
The inks that we use are genuine inks that have a 2 year no significant fade guarantee. So a minimum 2 year lifespan should be expected - with longer in low UV locations like Adelaide/Melbourne/Hobart.
The BreezeMax temporary fence mesh can be used over and over again. Once a project is finished, the mesh can be rolled up and taken to the next site.
Available Sizing
FenceWrap printed banner mesh comes in 50m rolls as standard. The roll can be supplied as a whole (which you can cut up for different sites) or we can pre-cut the roll into individual banners if you have a common size that you need or are happy to accept.
Common sizes that are cut are 5m and 10m. Two heights are available, 1600mm or 1800mm once finished.
Pro Tip
Custom Sizes & Panels
The printed banner mesh itself actually comes from the manufacturer in widths up to 5m, so we can make custom sized banners to cover scaffolding or buildings. Multiple prints we welded together to make a single banner, and are edged and eyeleted. We’ve actually made banners up to 30m x 30m before.
If considering the full banner mesh rolls, they can also be cut into banners if you like to fit specific fences or spaces. We charge per vertical cut, so you can cut 50m roll however you like.
BreezeMax Recommended Applications
Temp Fencing
Greenfield Builds
High Wind Locations
Airports / ADF / etc
Note: When going for BreezeMax as your selected fence mesh, you need to be aware that prints will have less impact than our other options. If you prioritise print impact, look at PrintMax mesh, or if you want a balance between the two, look at FenceWrap Classic.
Frequently Asked Questions
Can I cut a full roll up into smaller banners after it's made?
I am a builder, not a graphic designer, do you help with artwork?
How long does it take to manufacture FenceWrap?
Do you deliver?
Get Inspired
